 |
|
     
|
 The Washington 1019-REC Recirculating Lubrication System was
designed to provide a continuous pressurized flow of clean oil through the rotating
assembly. This, continuously cleanses the oil that is lubricating the bearings and
seals in the rotating assembly. Although this is a recirculating lubrication system, the oil reservoir level must be checked daily. The seals in the rotating assembly are designed to weep a minimum amount of oil to cleanse themselves. Fluid loss may also occur by a leak at any point in the lubrication system. The 1019-REC is fitted with an air-operated diaphragm pump and properly adjusted, will recirculate oil at a rate of 25 gallons per hour while maintaining 35 p.s.i. of oil pressure in the cavity of your rotating assembly. The 1019-REC Recirculating Lubrication System can be fitted with a metal cooling jacket and fan assembly, which continuously cools the oil when the 1019-REC is operated in a geothermal or high-pressure drilling application. Heated oil from the bearing assembly is circulated to the lubricator, cooled, and returned to the rotating assembly. The oil recirculated with the lubrication system can also be returned through a heat exchanger or chiller if higher operation temperatures are expected. Call or send us your inquiry for pricing. |